Open command prompt with admin access (by press Windows key then type "cmd" then Entre), type
netsh wlan show profiles
It will list all the Wifi network it have connected to. The Profile name is the SSID.
Find the SSID (Profile name) from the list and type
netsh wlan show profile name=”SSID” key=clear
It will show the Wifi password on "Key Content" line
관리자 권한이 있는 계정에서 콘솔창을 열고 (윈도우 키를 누르고 "cmd"라고 친 다음에 엔터를 친다) 다음과 같은 명령어를 입력합니다
netsh wlan show profiles
이때까지 이 컴퓨터에서 연결했던 와이파이의 목록이 쭉 나옵니다. 목록에 적힌 Profile Name이 SSID 입니다.
원하는 SSID 를 찾아서 다음과 같이 입력합니다.
netsh wlan show profile name=”SSID” key=clear
와이파이 암호가 "Key Content" 줄에 표시됩니다.
Showing posts with label hack. Show all posts
Showing posts with label hack. Show all posts
Saturday, February 24, 2018
Wednesday, August 02, 2017
Prestashop 1.6 Allow import image from file system 프레스타샵 1.6에서 이미지를 로컬 폴더에서 임포트 하기
In Prestashop 1.5, we can able to import images from local folder like "~/upload", it reduce import time considerably and stable. However in Prestashop 1.6 it was blocked
프레스타샵 1.5에서는 이미지를 로컬폴더에 넣어 두고 임포트를 할 수 있었지만, 1.6에서는 막혀 있습니다.
It's easy to allow import image from file system back again by commend single line.
코드 한 줄만 코멘트 처리 해 버리면 간단히 해결됩니다.
In controllers/admin/AdminImportController.php
Line 1070
comment out
$url = http_build_url('', $parced_url);
to
// $url = http_build_url('', $parced_url);
Now you can import image from local file system something like in CSV
ImageURL
../upload/637616.jpg;../upload/637616-2.jpg;../upload/637616-3.jpg;../upload/637616-4.jpg;../upload/637616-5.jpg
I use this way to upload bunch of files by FTP or SCP to /upload folder first then import multiple products without hiccup
Friday, December 03, 2010
Tip for installing OSX on VMware
Just simply do not remove focus from VMware screen while installing happens.
Simple but crucial somehow.
Simple but crucial somehow.
Saturday, February 28, 2009
Sony PS3Eye Camera DirectShow Capture Source Filter *Update* v2.1.0.0130 « AlexP’s Weblog
Sony PS3Eye Camera DirectShow Capture Source Filter *Update* v2.1.0.0130 « AlexP’s Weblog: "Manual removal of PS3Eye.ax and PS3EyeLib.dll files:
- Close any program that are using PS3Eye camera.
- Press ‘WinKey’+R on your keyboard or alternatively go to Start->Run
- Type the following: regsvr32 /u “C:\Program Files\AlexP\PS3Eye.ax”
- You will see the following dialog box confirming successful un-registration of the PS3Eye.ax file."
- Close any program that are using PS3Eye camera.
- Press ‘WinKey’+R on your keyboard or alternatively go to Start->Run
- Type the following: regsvr32 /u “C:\Program Files\AlexP\PS3Eye.ax”
- You will see the following dialog box confirming successful un-registration of the PS3Eye.ax file."
Sunday, August 03, 2008
Thursday, June 26, 2008
Tuesday, June 03, 2008
- Sony Service Menu - Checking and Resetting Lamp Hours
- Sony Service Menu - Checking and Resetting Lamp Hours
Procedure
1. To access the service menu, with the TV off, press the following buttons on the remote control sequentially in rapid succession (note: if the TV is already on, you can start by turning the power off, but then you should enter the full 4-button sequence within about 3 seconds to avoid a lamp restart):
<5>
2. Press until the PANEL service menu displays.
3. Press <2> until the OPTION_E category appears.
4. The "LampTM" (lamp power-on time in hours) and "LampCT" (lamp on/off cycles) entries are in the first item in the OPTION_E category. If they are not displayed, press <1> repeatedly until they do.
The display should look as follows:
PANEL NVM OK 9 OPTION_E
0 LAMP 0 Diff 1
LampTM #### LampCT ####
To reset these counters, press <3> .
"WRI-EXE" should be displayed momentarily in red text, followed by resetting to “0”.
5. To display the PanelTM (total LCD panel power-on time) entry, press <1> until it displays.
The display should look as follows:
PANEL NVM OK 9 OPTION_E
7 SH SFT1 10 Diff 1
PanelTM ####
6. When done, exit the service menu by turning off the TV (note: you can turn the TV back on immediately, but you should do so within about 3 seconds to avoid a lamp restart.
General service menu information
Enter Service Menu = <5>
Exit Service Menu =
Menu Next = <1>
Menu Previous = <4>
Category Next = <2>
Category Previous = <5>
Adjust Up = <3>
Adjust Down = <6>
Save New Settings =
Restore Factory Defaults = <8>
Procedure
1. To access the service menu, with the TV off, press the following buttons on the remote control sequentially in rapid succession (note: if the TV is already on, you can start by turning the power off, but then you should enter the full 4-button sequence within about 3 seconds to avoid a lamp restart):
2. Press
3. Press <2> until the OPTION_E category appears.
4. The "LampTM" (lamp power-on time in hours) and "LampCT" (lamp on/off cycles) entries are in the first item in the OPTION_E category. If they are not displayed, press <1> repeatedly until they do.
The display should look as follows:
PANEL NVM OK 9 OPTION_E
0 LAMP 0 Diff 1
LampTM #### LampCT ####
To reset these counters, press <3>
"WRI-EXE" should be displayed momentarily in red text, followed by resetting to “0”.
5. To display the PanelTM (total LCD panel power-on time) entry, press <1> until it displays.
The display should look as follows:
PANEL NVM OK 9 OPTION_E
7 SH SFT1 10 Diff 1
PanelTM ####
6. When done, exit the service menu by turning off the TV (note: you can turn the TV back on immediately, but you should do so within about 3 seconds to avoid a lamp restart.
General service menu information
Enter Service Menu =
Exit Service Menu =
Menu Next = <1>
Menu Previous = <4>
Category Next = <2>
Category Previous = <5>
Adjust Up = <3>
Adjust Down = <6>
Save New Settings =
Restore Factory Defaults = <8>
Tuesday, May 20, 2008
DTV Forum Australia > LG RT-44SZ60DB(DLP)44"
DTV Forum Australia > LG RT-44SZ60DB(DLP)44": "You can get to the Service Menu by pressing your Menu button on the remote and the Menu button on the TV at the same time for around 5 seconds."
Monday, May 19, 2008
>>Sony KDS-XXA3000<< Settings/Tweaks thread - OWNERS ONLY! - Page 2 - AVS Forum
>>Sony KDS-XXA3000<< Settings/Tweaks thread - OWNERS ONLY! - Page 2 - AVS Forum
To get into the Service menu ( Per garycase2001 )
The A3000 MAY be different than the A2020 ... but Sony rarely changes the Service
Menu entry codes ==> so I'd try the A2000/A2020 sequence:
[Power Off] - [Display] - [5] - [Volume Up] - [Power On]
These have to be pressed within one second of each other or the sequence won't work.
... if that gets you into the Service Menu okay, then this is what you would do on an A2020 to get to the lamp hours (the A3000 may be a bit different ... but this may give you the right idea => I suspect it's still labeled "LMP_TMP", although it may no longer be item #21):
Go into the PANEL section of the Service Menu (Press Jump until PANEL displays)
Item 21 TIMER / 0 LMP_TMP will tell you the # hours on your bulb
(index thru menus by pressing 2)
To get into the Service menu ( Per garycase2001 )
The A3000 MAY be different than the A2020 ... but Sony rarely changes the Service
Menu entry codes ==> so I'd try the A2000/A2020 sequence:
[Power Off] - [Display] - [5] - [Volume Up] - [Power On]
These have to be pressed within one second of each other or the sequence won't work.
... if that gets you into the Service Menu okay, then this is what you would do on an A2020 to get to the lamp hours (the A3000 may be a bit different ... but this may give you the right idea => I suspect it's still labeled "LMP_TMP", although it may no longer be item #21):
Go into the PANEL section of the Service Menu (Press Jump until PANEL displays)
Item 21 TIMER / 0 LMP_TMP will tell you the # hours on your bulb
(index thru menus by pressing 2)
Subscribe to:
Posts (Atom)